Appliance Description; Intended Use; Operation - Inventum HZ30 Gebrauchsanleitung

2

appliance description

HZ30/HZ31
Electric foot warmer
Size: 26 x 26 x 32 cm
Switch with 3 illuminated settings
Automatic switch off after 90 minutes
Removable lining hand washable
100 Watt
1. Illuminated display for temperature settings
2. Mains plug
3. Sliding switch for ON/OFF and temperature settings
4. Mains cable
5. Controller
6. Foot warmer
3

intended use

CAUTION
This foot warmer is intende only for heating human feet.
4

operation

4.1 Safety
CAUTION
This foot warmer is fitted with the INVENTUM SAFETY SYSTEM (ISS). This electronic sensor technology prevents the entire
surface of the foot warmer from overheating by automatically switching off in the event of a fault. If the safety system
switches off the foot warmer automatically as a result of a fault, the settings are no longer illuminated even when the foot
warmer is switched on.
Please note that, after a fault has occurred, the foot warmer can no longer be used for safety reasons and must be sent to the
service address indicated.
4.2 Initial use
Insert the mains plug into the socket.
4.3 Switching on
To switch on the foot warmer, set the slider for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature setting is
illuminated when switched on.
4.4 Setting the temperature
Setting 0: OFF
Setting 1: minimum heat
Setting 2: medium heat
Setting 3: maximum heat
HZ31-instructions.indd 13
1
2
3
4
6
5
English •
27-8-2014 11:10:38
13