Venicci ENGO BASE Bedienungsanleitung Seite 11

Installation in the vehicle
Ensure that the handle is in its upper position D.
4.3 Disassembly instrustion
4.3.1 Method one:
First remove the infant carrier from the base, then remove the base.
Pull the handle
on the base to
unlock. Remove
the infant carrier
from the base.
Squeeze the support leg adjusting button
to retract the support leg.
17
Press the ISOFIX
release button to
slide the ISOFIX
connectors to
separate the base
and the seat.
Finally, rotate the support leg
and insert it into the slot at the
bottom of the seat.
Installation in the vehicle
4.3.2 Method two:
Remove the infant carrier and the base from the seat together.
Squeeze the support leg adjusting button
to retract the support leg.
Press the ISOFIX release button
to slide the ISOFIX connectors to
separate the base and the seat.
Finally, rotate the support leg
and insert it into the slot at the
bottom of the seat.
18