PCE Instruments PCE-AQD 50-ICA Bedienungsanleitung Seite 32

5 Operation
5.1 Start-up
To start up the device, press and hold the Power key for approx. 1.5 s. The device will display a
boot screen (fig. 3), followed by the home screen (fig. 4). The number of sensors displayed on
the home screen depends on the number of sensors enabled (fig. 4/5). The device will start up
with the sampling times set before turning off. At first start-up, the sampling times are 2 minutes
for all sensors but CO the default sampling time of which is 10 minutes.
2
It is also recommended to set the time and date of the device (00:00 and 01/01/2021 as default
on start-up).
Fig. 38 Boot screen
Fig. 39 Home screen with all sensors enabled
Fig. 40 Home screen with three sensors enabled
© PCE Instruments
29