cecotec GRANDHEAT 3010 Bedienungsanleitung Seite 44

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1. Control panel
Mica panel
2.
Rotary plate rotating shaft
3.
Rotary plate rotating ring
4.
5. Dish
6. Door
7. Door lock system
Control panel
Fig. 2.
1. Timer
2. Power selector
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If any of them
are missing or not in good condition, please contact Cecotec's official Technical Support
Service immediately.
- The product must be placed on a flat, stable, and dry place and kept away from corrosive
materials, heat, and humidity, such as gas burners or water.
- The product must be sufficiently ventilated and must therefore be placed at least 85 cm
above the ground. You must ensure a distance of at least 30 cm on top and at least 20 cm
between the device and any adjacent wall. Leave 10 cm of space behind the device.
The product must be placed, at least, at 5 m from any TV, radio, or antenna.
-
- The product must be placed in such way that the plug is accessible and must ensure an
effective grounding in case of leakage to avoid electric shocks.
44 GRANDHEAT 3010/GRANDHEAT 3020
GRANDHEAT 3030/GRANDHEAT 3040 MIRROR
GRANDHEAT 3050 /GRANDHEAT 3060 MIRROR