Hettich AxisDrive IPSe Bedienungsanleitung Seite 8

Troubleshooting
AxisDrive cannot be adjusted although the handset is operated.
a. Check mains connection
b. Check handset plug
Hettich Franke GmbH & Co. KG
Hinter dem Ziegelwasen 6/1
72336 Balingen - Germany
Technical Data
Mains connection 220 – 240 VAC, 50/60Hz.
Low electromagnetic radiation from integrated SMPS mains unit.
Meets ecodesign directive 2009/125/EC at a standby power of ≤ 0.5 W.
Protection type: IP 20
Produced according to VDE protection class II
Power consumption: 30 – 300 Watt depending on load
Attention! This AxisDrive double drive is only meant for use in beds, slatted bed frames
and/or boxspring beds, for lifting and lowering the head and foot section. AxisDrive is
intended for this use only.
Attention! Operate AxisDrive only in intermittent duty (ID 2min/18min). Avoid electrical
and mechanical overload.
Always connect the handset correctly. Plug the mains plug correctly and firmly into socket
outlet. AxisDrive must only be opened by authorised specialists. Pull the mains plug before
opening/removing from the slatted bed frame. The user is held responsible for any damage
from disassembly of AxisDrive!
For further information, see our website at
www.hettich.com (Service – Media centre)
8