Scooty SCOOT160 Bedienungsanleitung Seite 14

Mounting the handlebar :
EN
1. First orient the handlebars in the right direction.
2. Tighten the fixing screw on the stem using the wrench provided.
3. Check that the handlebars are correctly oriented.
Assembly and adjustment of the saddle:
Loosen the nut on the seat post clamp to be able to change the height of the
seat post in the frame.
Select a height and tighten the seat post clamp nut. When adjusting the
saddle to its lowest position, make sure that the saddle does not touch any
component of the bicycle such as the battery cover. Also, be sure not to
exceed the minimum seat tube insertion mark. This insertion mark should
never be visible when using the bike.
IMPORTANT : To determine your saddle height, sit on the bicycle and place a
heel on the pedal in the down position with the crank parallel to the seat post.
When your leg is extended the saddle height is correct.
Recommended saddle height and user size:
Wheel dimensions
27.5''
*
Size for an «optimal» use of the device.
Maximum height of
the saddle
96 cm
14
Minimum saddle
height
84 cm
Recommended user
size*
165 - 185 cm