Meec tools 015879 Bedienungsanleitung Seite 23

SYMBOLS
Read the instructions.
Wear ear protection.
Wear safety glasses.
Wear a dust filter mask.
Safety class II.
Sound power level.
100
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
Output
Chuck type
Capacity in concrete
Capacity in steel
Capacity in wood
Speed
Stroke rate
Percussion force
Cord length
Weight
Sound pressure level, LpA 89 dB(A), K=3 dB(A)
Sound power level, LwA
Vibration
Always wear ear protection.
The declared values for vibration and noise,
which have been measured by a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-2-6:2010.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
230 V ~ 50 Hz
800 W
SDS+
25 mm
13 mm
40 mm
900 rpm
3900 spm
2 m
3.6 kg
100 dB(A), K=3 dB(A)
19.200 m/s², K=1.5 m/s²
EN
4 J
23