Herunterladen Inhalt Inhalt Diese Seite drucken

Carmen ThermoCeramic Ion CR2190 Gebrauchsanweisung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CAUTION!
The appliance can be damaged by overheating!
Make sure that the appliance is open during the cooling phase.
Ion generator
FIGURE 6
Your appliance is fitted with an ion generator. Activating this function will give your
hair enhanced shine while styling. The ion generator also prevents the build-up of
static charge on your hair. To activate the function, press the ion ON/OFF switch
(a) (see fig. 6). The ion indicator lights up green, ions are discharged from the ion
discharge openings (f).
Note!
The ion generator can only be activated, when the appliance is switched on before,
by using the ON/OFF switch (b). After turning the appliance off, the ion generator is
always deactivated when turning the appliance back on. To reactivate the function,
press the ion ON/OFF switch (a). To deactivate the ion generator, press the ion ON/
OFF switch (a) again. The ion indicator light goes off.
Automatic deactivation function
FIGURES 7 – 8
The appliance is energy-efficient and it switches off automatically after 45 minutes.
The display starts to flash after 40 minutes, i.e., 5 minutes before the actual
deactivation operation (see fig. 7a). Two options are available to you for selection
during this period:
1. You can allow the 5 minutes to pass without actuating any key- the appliance is
deactivated. This is indicated by permanently lights of the display (see Figure 7b).
2. You can press the control switch +/– (c) once or the ion ON/OFF switch (a)
within these 5 minutes to interrupt the deactivation operation and continue to
work with the appliance directly (see fig. 8a). This action resets the deactivation
operation. The system starts counting another 45 minutes before triggering the
next deactivation (see fig. 8b).
Note!
Once the appliance is in stand-by mode it is only possible to start it up again by
pressing the "+/-" c rocker switch, as described above. Pressing the On/Off switch
b or removing the mains plug from the mains and plugging it in again does not
switch the appliance on again- it is still in stand-by mode.
› Cleaning and maintenance
DANGER! Danger to life from electric shock!
There is danger to life in case of contact with live cables or components! Hence,
please observe the following safety instructions:
• Before cleaning, disconnect the appliance from the mains.
• Never immerse the appliance in water.
WARNING! Danger of burns from hot appliance components!
Parts of the appliance can be very hot and cause burns even after it has been
switched off. Hence, allow the appliance to cool down fully without fail before
cleaning it.
CAUTION!
Please observe the following safety instructions to avoid damages and risks
attributable to improper use:
• Do not use sharp or abrasive cleaning agents.
• You can clean your appliance with a slightly damp cloth and dry it with a soft dry
cloth.
• If the straightening plates get dirty, use a few drops of washing-up liquid to help
clean them. Make sure that you remove all washing-up liquid residues from the
straightening plates.
› Environment and Disposal
Never dispose of your appliance with the regular household waste. Follow the waste
disposal regulations of your locality or return your appliance to retailer.
English • 9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis