Kathrein 20710013 Bedienungsanleitung Seite 7

Optimising with a DVB-T/T2 Receiver
Some receivers o er the option of displaying the reception level and the signal quality on the screen, thus permitting further optimi-
sation of the antenna positioning. For more information, refer to the operating manual of your receiver.
Wall Mounting
A wall bracket and the necessary mounting material for mounting the antenna
on the wall are included in the scope of delivery.
► Test the reception and look for the most suitable reception position on the
wall before drilling the holes for the wall bracket.
Cleaning
● Clean the antenna only with a slightly moistened cloth.
● Do not use aggressive or abrasive cleaners because these could damage the surface of the housing.
● Do not immerse the device in any fl uid.
Technical Data
Type
Order number
Reception range
Figure of merit
)
Max. output level
)
Dimensions
Packaging unit/weight
Single pack dimensions
) Bandwidth 8 MHz, Tu = 290 K, connection cable a = 3.5 dB, AF receiver = 7 dB @ 560 MHz
) According to EN 60728-5 for 60 dB intermodulation ratio (2 transmitters – 3
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, KATHREIN Digital Systems GmbH declares that the radio equipment type
BZD 32, order no.: 20710013
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address:
MHz
dB/K
dB V
mm
St./kg
mm
www.kathrein-ds.com
174 – 230/470 – 790
typ. –28.4
250 x 160 x 70
order) measured at antenna output
rd
3 / 4
BZD 32
20710013
typ. 95
140 x 195
1 (10)/0.5