Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BZD 32
20710013
DVB-T/T2 Antennas
Indoor Antenna
Features
■
DVB-T/T2 indoor antenna for horizontal and vertical polarisation
■
Active antenna with an integrated amplifi er
■
Attractive, space-saving design
■
Extremely low noise factor
■
No special alignment necessary due to a nearly omni-directional
characteristic (vertical)
■
Remote power feed (5 V/30 mA) via the USB cable by means of a
connected TV set
■
Connection: IEC plug
■
Integrated blocking fi lter for GSM and LTE interference
Scope of Delivery
● Support foot for easy mounting
● Wall bracket with mounting material
● USB cable, 3 m
Necessary Accessories
For the reception of DVB-T/T2 signals, a DVB-T/T2-compatible recipient with remote feeding (5 V) via the USB cable is required.
Intended Use
The BZD 32 is an active antenna for the reception of digital terrestrial television and radio signals in the VHF- (Band III) and UHF
bands. The antenna is suitable for the indoor use when the signal level is su ciently high.
Only use together with a suitable DVB-T/T2 receiver with 5 V power supply.
Any other use or failure to comply with these user instructions and the documentation and instructions accompanying the equip-
ment will void the warranty or guarantee.
Tip
Keep these instructions for further reference and give them to the next owner if the antenna is sold.
General Remarks on Broadcasting
In areas with low or too high reception-fi eld strength, interference-free reception is not always guaranteed. If the signal level is too
low, it is necessary to place a directional antenna outside the building.
In the immediate vicinity of the transmitter, reception may be impaired by too high a reception level.
Reception indoors can also be impaired by other factors. Critical locations are rooms in reinforced concrete buildings or buildings
with vapour-plated windows, closed metal cabinets, or positions directly beside transmitting electronic devices, e.g. mobile phones.
geeignet für DVB-T/T2
1 / 4
Werbung
