Verwandte Anleitungen für Beamz DMX-192S
Inhaltszusammenfassung für Beamz DMX-192S
- Seite 1 DMX-192S controller 192 channel Ref. nr.: 154.060 INSTRUCTION MANUAL GEBRUIKSAANWIJZING GEBRAUCHSANLEITUNG MANUAL DE INSTRUCCIONES...
- Seite 2 ENGLISH Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock.
- Seite 3 NEDERLANDS Hartelijk dank voor de aanschaf van dit Beamz lichteffect. Neemt U a.u.b. een paar momenten de tijd om deze handleiding zorgvuldig te lezen, aangezien wij graag willen dat u onze producten snel en volledig gebruikt. Lees deze handleiding eerst door alvorens het product te gebruiken. Volg de instructies op anders zou de garantie wel eens kunnen vervallen.
- Seite 4 DEUTSCH Vielen Dank für den Kauf dieses Beamz gerat. Nehmen Sie sich einen Augenblick Zeit, um diese Anleitung sorgfältig durchzulesen, damit sie die Möglichkeiten, die unser Produkt bietet, sofort voll ausnutzen können. Lesen Sie erst die Anleitung vollständig vor der ersten Inbetriebnahme durch. Befolgen Sie die Anweisung, da sonst jeglicher Garantieanspruch verfällt.
- Seite 5 ESPAÑOL Enhorabuena por la compra de este efecto de luces Beamz. Por favor lea atentamente este manual antes de usar el aparato para disfrutar al completo de sus prestaciones. Seguir las instrucciones le permite no invalidar la garantía. Tome todas las precauciones para evitar que se produzca fuego o una descarga eléctrica.
- Seite 6 General Description This DMX operator running light control is designed for digital control of various light effects such as running lights and projectors. It can control up to 12 different light effect units of 16 channels each. The unit features an easily programmable memory which can store up to 240 different light effect scenes.
- Seite 7 LED DISPLAY The display shows light green, easy to read symbols that indicate following functions: The first figure indicates the selected running light pattern (CHASE) (1 – 6) The second figure shows which one of the 8 scenes has been selected. The third and fourth figure shows which one of the 30 memory banks is active.
- Seite 8 CLEARING A SCENE 1) This function allows to reset all 16 DMX channels in a scene. 2) Switch the programming mode on and select via the BANK arrow keys the memory bank that contains the scene to be removed. 3) Keep the AUTO/DEL key pressed while pushing the relevant scene key. 4) The LED’s flash to confirm and the scene is erased.
- Seite 9 CLEARING A STEP (SCENE) 1) Activate the programming mode by pressing the PROGRAM key until the PROG LED on the display is flashing. 2) Choose the running light program via one of the CHASE keys from which you want to remove a step (scene). 3) Press the TAP SYNC/DISPLAY key once.
- Seite 10 MUSIC CONTROL 1) Press the MUSIC/BANK-COPY key. The MUSIC TRIGGER LED must light up. 2) Select a running light pattern via one of the CHASE keys. 3) The built-in microphone controls now the running of the patterns. 4) Switch this mode off by pressing the MUSIC/BANK-COPY key. MIDI CONTROL 1) Switch this protocol on by pressing the MIDI/REC key for 3 seconds.
- Seite 11 CE Declaration of Conformity Importer: TRONIOS BV Bedrijvenpark Twente 415 7602 KM - ALMELO Tel : 0031546589299 Fax : 0031546589298 The Netherlands 154.060 Product number: DMX 192S Controller 192 Channel Product Description: Regulatory Requirement: EN 60065 EN 55013 EN 55020 EN 61000-3-2/-3-3 The product meets the requirements stated in the above mentioned Standards.