Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before using for the first time
1
Remove the plastic blade covers from the knife
blade. Take care the blades are very sharp.
These covers should be discarded as they are to
protect the blade during manufacture and transit
only.
2
Wash the parts see 'care and cleaning'.
Key
Processor
Pusher
1
Feed tube
2
Lid
3
Bowl
4
Detachable drive shaft
5
Power unit
6
Pulse button
7
Speed 1 button
8
Speed 2 button
9
OFF button
bk
bl
Cord storage (at back)
Safety interlocks
bm
Plastic Blender
bn
a
Blade assembly
b
Sealing ring
c
Goblet
d
Filler cap
e
Lid
A Standard Attachments
Knife blade
b
Dough tool
b
Emulsifying tool
b
4mm slicing/grating disc
b
2mm slicing/grating disc
b
Extra fine grating disc
bt
Mini chopper/mill
ck
Citrus juicer
cl
To Use Your Food Processor
Illustrations
–
1
1
Fit the detachable drive shaft onto the power unit.
2
Then fit the bowl to the power unit and turn
clockwise until it locks into position.
3
Fit an attachment over the bowl drive shaft.
Always fit the bowl and attachment onto the
l
processor before adding ingredients.
4
Fit the lid - ensuring the top of the drive shaft/tool
locates into the centre of the lid.
5
Plug in, switch on and select a speed. (Refer to
the recommended usage chart).
5722000083 Iss 1 Braun Metal FP301BI Multi B5.indd 4
5722000083 Iss 1 Braun Metal FP301BI Multi B5.indd 4
1
11
21
31
3
The processor will not operate if the bowl or lid
l
are not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
Use the pulse (P) for short bursts. The pulse
l
will operate for as long as the button is held in
position.
6
Reverse the above procedure to remove the lid,
attachments and bowl.
Important
Your processor is not suitable for crushing or
l
grinding coffee beans, or converting granulated
sugar to caster sugar.
When adding almond essence or flavouring to
l
mixtures avoid contact with the plastic as this may
result in permanent marking.
Using The Attachments
Refer to recommended usage chart for
2
3
4
5
6
each attachment.
Plastic Blender
12
13
14
15
16
To Use Your Blender
22
23
24
25
26
Illustrations
4
1
Fit the sealing ring into the blade
assembly - ensuring the seal is located correctly in
32
33
34
35
36
the grooved area.
Leaking will occur if the seal is damaged or
l
incorrectly fitted.
2
Hold the underside of the blade assembly and
insert the blades into the goblet - turn anti-
clockwise until it is secure. Refer to the graphics
on the underside of the blade assembly as follows:
- Unlocked position
- Locked position
3
Put your ingredients into the goblet.
4
Fit the lid onto the goblet and turn clockwise until it
clicks. Fit the filler cap.
5
Fit the blender to the power unit and turn
clockwise to lock in position.
Hints and Tips
When making mayonnaise, put all the ingredients,
l
except the oil, into the blender. Remove the filler
cap. Then, with the appliance running, add the oil
slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need
l
scraping down. If the mixture is difficult to process,
add more liquid.
The processing of spices is not recommended as
l
they may damage the plastic parts.
To blend dry ingredients - cut into pieces, remove
l
the filler cap, then with the appliance running,
drop the pieces down one by one. Keep your
hand over the opening. For best results empty
regularly.
4
7
8
9
10
17
18
19
20
27
28
29
30
–
6
37
38
39
40
06/02/2020 08:30
06/02/2020 08:30
Werbung
