Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Part 8：Common operating procedures of the software
Turn on the
power of the unit
and adjust the
focus
draw：Lines,
curves, rectangles,
circles and
polygons
Choose a
Text: Click on the
drawing
auxiliary
tool
toolbar
。
Image: Click on
the auxiliary
toolbar
Vector: Click on
the auxiliary
toolbar
Open the U disk, find the
Insert the U disk
CyPressDriverlnstaller file,
and connect
the required
computer with
and follow the prompts to
the cable
complete the installation;
Click on the
auxiliary
toolbar
、
Edit dimensions,
etc. in the object
properties
window
Click on the
auxiliary
toolbar
、
Edit text content,
fonts, etc. in the
object properties
window and save
Click on the auxiliary
toolbar
、Import the
object to be marked, edit
the parameters such as
。
inversion, grayscale, DPI in
the property window and
save it
。
Click on the
auxiliary
toolbar
、
driver
copy it to the computer,
double-click to install,
Click to fill
，
Choose a fill
method"Filling"，
click
In "Mark Configs",
select to enter
"Expand..." interface,
check "Bitmap scan
increment"
Click to fill
Adjust "Line" to
0.04MM, click
In the copied file,
find the BslCAD
software and follow
the prompts to
complete the
installation
Set "Speed (mm/s)"
and "Power (%)" in
"Marker Control
Window"
，
After the software
installation is
complete, open
SeaCAD in the
software and start
using
Click
，Check
the marking position and
range, if it is not suitable,
please re-adjust and edit
Click
，
start marking
Complete the marking, if
unqualified, please re-
adjust the parameters
Werbung
