Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Air Pump
On/Off
When the bathtub is full of water, shortly press the button
of the button will be lit in white color. The air pump will start with the maximum wind and will change
to Level 3 in 2 seconds. Shortly press the button
When the air pump is on, if the bathtub change to less of water, the air pump will be auto off.
Air pump speed adjust
When the air pump is on, shortly press the button
level of air pump shown as below:At this time press the button
The range is from Level 1 to Level 5. L5 is the most strong wind. If there is no operation after settings, the
system will auto get back to working mode in 3 seconds.
Thermostat
1.
On/Off
The thermostat function is restricted by the water pump function. When water pump function is off,
the thermostat function is invalid. When the water pump is shut off the thermostat function will be off.
When the bathtub is full of water and water pump function is on, shortly press the button
thermostat function. After thermostat function is on, if the water temperature is 2 degree C lower than the
setting temperature, the thermostat heater will be auto heating until the water temperature is 1 degree C
higher than the setting temperature. At this time the heater will stop heating.
If the bathtub lacks of water and the thermostat function is on, the heater will stop heating. The backlight
of the button
will flashes alternately in white and blue color. If the system detects full water again and
water pump is on, the heater will be auto heating again.
2.
Thermostat temperature adjust
When the thermostat function is on, shortly press the button
shows the
icon of the thermostat temperature and display the current temperature shown as
below:
At this time press the button
C. If there is no operation after setting the temperature, the system will be back to work.
Lighting
Generally, lights starts and closes with the system. You can shortly press the button
turn off the lights.
29
again can turn off the air pump.
one time or several times until it shows and display the
or
to adjust the thermostat temperature. The range is
to turn on the air pump. The backlight
or
to adjust the level of the air pump.
one time or several times until it
to open the
from 25 to 42 degree
，
to turn on or
Werbung
