spavida C667 Montageanleitung Seite 25

2.Surf ing function:
Firstly,fill water into the bathtub When the indicating sign(
standard level,You can press surfing key(
dynamic sufng sign will also appear on the screen accordingly.You can switch off the surfing
function by pressing surfing key(
the surfing sign on the screen will disappear[Note:A.When the water in the bathtub Does not
reach standard level,the surf ing pump will not start;only static sign(
shortage sign( )appear on the screen .Then you need to f ill water into the bathtub.B.When
the surfing pump is activated for 60 minutes,it will switch off the function automatically.]
3.Function of heater(SELECTABLE):
Only after starting the surfing pump can start the heating function effectively by pressing
heating key( ) more than 2 seconds . The heating sign(
accordingly.If the sign is dynamic,it means that the working conditions of heater are satisf ied
and the system is under heating.If the sign is static,it means that the working conditions are not
met and the heater will stop working.[Note:When surf ing pump is switched off,this funcion will
also be deactived.]
4.Bubble bath pump Function:Press(
display " " sketch,press again(
5.Water light function:Press (
" " sketch,press again(
6.Ozone function:Press(
" sketch,press again(
Ozonizer is 15 minutes. So the Ozonizer auto is turned off after 15 minutes)
25
) on the panel for starting of surfing pump while a
) on the panel.Then the surfing pump will stop running and
)key,the bubble bathr pump is turned on,LCD
) key to turn OFF.
)key,the water light is turned on, LCD display
) key to turn OFF.
)key for over 2 seconds,the ozone is turned on,LCD display" O3
) key for over 2 seconds to OFF.(NOTICE:The working-time of the
) goes out, it has reached
)and f lashing water
) will appear on the screen