Cleaning And Care - BOMANN cb 850 Bedienungsanleitung

4....-05-CB 850
4. Setting the Temperature Level (right switch):
Position 1:
Position 2:
Position 3:
Setting the desired blower strength (left switch):
Position 0:
Position 1:
Position 2:
COOL-Shot:
TURBO button: By pressing the turbo button you can increase the air current
Clean the air suction opening from time to time with a fine brush. Clean the hou-
sing with a soft, dry cloth without additives.
Removing the air suction cover
Remove the cover after turning the cap through approximately 30 degrees against
a clockwise direction. Remove the intake filter and clean under running water. Dry
the filter well before mounting again!
This appliance conforms with the CE directives for radio interference suppression
and low-voltage safety and has been built to meet current safety requirements.
Subject to technical changes without prior notice!
We undertake to guarantee the appliance sold by our company for 24 months as of
the date of purchase (cash receipt).
During the life of the warranty we shall provide for the repair or replacement of the
appliance owing to material or manufacturing defects absolutely free of charge.
Proof for the warranty is provided by the purchase document. The replacement and
repair will not be performed free of charge without this proof of purchase.
Should the warranty be valid, please consign the complete appliance in its original
packing together with the cash receipt to your local dealer.
You are not entitled to the replacement of the appliance owing to broken glass parts
and faulty accessories. However, said parts will be replaced free of charge. In this
15.03.2002 9:42 Uhr
cold air
medium temperature for gentle drying and shaping
high temperature for rapid drying
OFF
gentle stream of air
strong stream of air
With this switch it is possible to interrupt the heating
process so that the air can be mixed according to individual
requirements.
even further.

Cleaning and care

Guarantee
Seite 21
GB
21