Axis Q3517 LV Installationsanleitung Seite 14

AXIS Q3517–LV Network Camera
6. Wind the network cable along the grooves on the mounting bracket to keep extra cable
length that may be required later.
Connect the cables and attach the unit casing to the mounting bracket
1. Insert an SD card in the camera unit (optional).
1
Connector guard
2
Tab
3
Cable gasket
2. Attach the provided connector guard to the network cable.
3. Pull the tab from the cable gasket farthest from the network connector in the camera
unit.
4. Push the network cable through the cable gasket .
5. Remove the connector guard from the network cable.
6. Route the network cable through the cable gasket.
7. Pull the network cable back slightly so that the cable gasket adjusts itself on the cable.
14