TCL RP318BSE0 Bedienungsanleitung Seite 11

Power on for the first time
The first time the power is turned on, the refrigerator operates according to the refrigerator room at 5 ° C,
and in the freezer at -18 ° C.
Child lock function
On: When there is no key operation in the display within 30 seconds, the child lock icon on the display lights
up, and the remaining characters go out, and the child lock function is entered immediately. After 5 minutes,
the child lock icon goes out and enters the display protection function. In the screen saver mode, Press any
key to exit the screen saver mode.
Close: When the child lock of the display is turned on, press and hold the "Unlock for 3 seconds" button for
3 seconds to unlock, that is, the child lock function is turned off.
Refrigerating chamber temperature adjustment
In the unlocked state, repeatedly press the "Fridge" key to adjust the temperature of the refrigerating
chamber. The setting temperature for refrigerating chamber cycles among "2" → "4" → "6" → "8" → "OFF"
"Power Cool" "2". Stop the key operation after an appropriate temperature is selected and wait for 5
→ →
seconds, the confirmation for temperature setting is completed. (The setting temperature of "OFF" for the
refrigerating chamber indicates the refrigeration turn off function. After the refrigeration turn off function is
enabled, the refrigerating chamber will stop refrigerating.)
Freezing chamber temperature adjustment
In the unlocked state, repeatedly press the "Freezer" key to adjust the temperature of the freezing
chamber. The setting temperature for freezing chamber cycles among "-15" → "-17" → "-19" → "-21" → "-
24" →"Power Freeze" → "-15". Stop the key operation after an appropriate temperature is selected and
wait for 5 seconds, the confirmation for temperature setting is completed.
Power Cool function
Under "Power Cool" state, the "Power Cool" icon lights up, and the refrigerator compartment runs at 2°C
until the function exits. It will automatically exit after 2 hours after entering "Power Cool". Under "Power
Cool" state, you will automatically quit the power cool function when the refrigerating door is opened over
3 minutes.
Power Freeze function
Under "Power Freeze" state, the "Power Freeze" icon lights up and the freezer runs at -24°C until the
function exits. It will automatically exit 4 hours after entering "Power Cool".
Smart function
In the unlocked state, press and hold the "Fridge" button for 3 seconds to enter the smart function,
and the "smart" icon will light up You can quit the smart function with the same operation.
When the smart function is enabled, the refrigerator will realize self-monitor for the state of each
compartment, so as to run with the most effective way. Under the smart state, the refrigerator
many automatically enter "Power Cool" or "Power Freeze" function according to the temperature
rise in the refrigerating and freezer chamber.
9
EN