NOTE: Read the entire instruction manual before you start installation and assembly.
• Please note: Images in these assembly instructions are only technical presentation of the product.
Actual product design may vary minimally.
• Do not begin the installation until you have read and understood all the instructions and warnings
contained in this installation sheet. If you have any questions regarding any of the instructions or
warnings, please contact your local distributor.
• This product was designed to be installed and used ONLY as specified in this manual. Improper
installation of this product may cause damage or serious injury.
• Make sure that the supporting surface will safely support the combined weight of the equipment
and all attached hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this
greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product
failure and personal injury.
By reason of large television construction types on the market, we can't adjust our screen
installation materials for the wall mount for each screen type. Therefore it is possible that
the screws which are numerously delivered don't fit with your TV. We ask for your
understanding that we can't cover up all possibilities of many screen types.
• Make sure that before and after the installation of the screen and the mount bracket neither you
nor somebody else can be injured and other objects can be damaged. In case of doubt request for
help from an expert.
• Make also sure that you and optionally the co-helper or representatives have registered the
mounting instructions before the installation and also the warning notice.
Dear customer,
we are pleased that you have decided for a product of the brand "RICOO"
Sometimes, despite our efforts to provide you with a high-quality product, it may happen
that an accessory is missing or a part is damaged during transport
return the item in such a case, simply request replacement for the missing or damaged
part at our customer hotline .
Contact details from our customer hotline are listed below.
When contacting us, please mention the article data (listed on the right side),
article color as well as the required spare part numbers (including the required
quantity of items), as indicated in the "Scope of delivery" section of this manual.
Please keep ready your order number / order ID for our customer hotline. We will process
your request immediately
All manuals and user guides at all-guidesbox.com
WARNING
!
.
. Please do not
2
Product data
FS314
Customer hotline
E.N.Z. Engineering GmbH
Gewerbestr. 11
79364 Malterdingen
(Germany)
Tel: +49 (0) 7644-565310
Fax: +49 (0) 7644-5653199
E-Mail: support@ricoo.de
www.ricoo.eu
English
Deutsch