Beko B32L 5745 4B Bedienungsanleitung Seite 99

GENERAL INFORMATION
Receiving digital stations
To receive digital satellite stations (DVB-S) you
7
need a satellite antenna.
To receive digital stations (DVB-T) you need a
7
digital rooftop or indoor antenna.
The antenna cable of the cable TV network
7
that broadcast in DVB-C must be plugged into
TV in order to receive the DVB-C broadcasts.
Unlike analogue broadcasting, not every
7
station has its own transmission frequency.
Instead, several stations are grouped into
what are known as bouquets on a regional or
national level.
You can find the current transmission
7
information on teletext from various
broadcasters, or look in a TV guide or on the
Internet.
Various digital television stations from private
7
broadcasters are encrypted (DVB-S, DVB-T
and DVB-C). Watching these stations and the
recording and playback functions are only
possible with the appropriate CI module and
a SmartCard. Ask your specialist dealer.
SCR System
Your TV supports SCR system (Single Channel
Router). With SCR satellite system, several users
can individually receive all signals from the
satellite simultaneously.
8 / 89 TR
-------------------------------------------------------------------
Important notes on
environmental protection
Those items mentioned below will help you
reduce the consumption of natural resources as
well as save your money by reducing electricity
bills.
If you will not be using the TV set for several
7
days, it should be disconnected from the
mains for environmental and safety reasons.
TV will not consume energy in this condition.
If the TV set has main switch, it will be enough
7
to turn the TV off via main switch. TV will
reduce energy consumption almost to Zero
Watt.
TV consumes less energy on stand by mode.
7
However, some TV sets may have features
such as on timer, that require the TV set to be
left in standby to work correctly.
TV consumes less energy when brightness is
7
reduced.
Notes on still images
Watching the same image for a long time on
the screen may cause a still image remain
feebly on the background. Feeble image(s) on
the background is originated from LCD/LED
technology and does not require any action
under guarantee. To avoid such cases and/or
minimize the impact, you may observe the tips
below.
Do not allow the same TV channel to stay on
7
the screen for a very long time. Channel logos
may cause this situation.
Do not allow the images, which are not full
7
screen, to constantly stay on the screen; if
not streamed in full screen format by the
broadcaster, you can convert the images to
full screen by changing picture formats.
Higher brightness and/or contrast values will
7
lead this impact to appear faster; therefore,
you are recommended to watch your TV in
the lowest brightness and contrast levels.
Television / User Manual