Connecting External Data Media; Removing The External Data Media - Beko B32L 5745 4B Bedienungsanleitung

USB OPERATION

Connecting external data media

It is advised to put the television on stand-by
mode with » 8 « before connecting the external
data medium. Connect the device and then
switch the television on again.
Before disconnecting the data medium, the
television must first be switched to standby,
otherwise files can be damaged.
Notes:
The socket USB1 at the side of the
7
television supports 500 mA current
according to the USB standard. Devices
such as external hard disk and etc.
that consume more power can only be
connected to the USB(HDD) interface of
the television.
If you are using a power cable for the
7
external hard disk that you have connected
to the USB(HDD) USB interface, then the
power cable of the external hard disk must
also be unplugged when the TV is turned
off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
USB transfer is not an operating mode in
7
itself. It is only an additional function.
Television / User Manual
--------------------------------------------------------------------------------------------
1 Connect the USB(HDD) USB interface on
the television and the related data output
on the external device (external hard disk,
digital camera, card reader or MP3 player)
with a USB cable;
or
plug the memory stick in the USB1 socket
at the side of the television.
Removing the external data
media
Before removing the external data medium, log
off the data medium.
1 Open the menu with »MENU«.
2 Select the menu item »Media Center« with
»
V
confirm.
– »Media Player« menu is displayed.
3 Select the name of the data medium with
»
V
4 Select the »Media Options« with »TOOLS«.
5 Select the line »Disk Management« with
»
V
6 Select the line »Safely Remove Disk« with
»
V
7 Remove the data medium from the socket.
8 Press »EXIT« to end the setting.
USB(HDD)
< >
«, » «, » « or » « and press »OK« to
Λ
« or » « and press »OK« to confirm.
Λ
« or » « and press »OK« to confirm.
Λ
« or » « and press »OK« to confirm.
Λ
45 / 89 TR