Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9
Add water and plant food through the
Place seed pods into the bowl.
feeding window.
Make sure that pump cord is plugged in.
Press and hold the "
" button for 5
Then plug in the power cord adapter.
seconds to start your hydroponic system.
NEXT: Planting Your Garden
Before your planting, Please press the "
" button for 5 sec.
"
" Setting is a quick setup for starting your new garden. The LED timer pump will be reset once you press it for
5 sec.
1. Watering
- Add water through the feeding window until the water level reaches "Fill to Here".
- It's ok to add water at any time. Keeping the water filled to "Fill to Here" will promote good growth.
- It's better to use tap water or distilled water then well water.
- Your pump cycle is set to be ON for 5 minutes and OFF for 25 minutes.
2. Add Nutrients
- Add nutrients every 2 weeks (10ml A+10ml B Plant Food).
- Don't over feed. Too much plant food can harm your plants. Use the recommended amount of plant food.
- Add plant food into the bowl through the feeding window when you first start your planting.
3. Growing Lights
- Hydroponic System has a built-in lighting timer. Once you set it up, it will automatically turn on or off every day.
- Mode A: ON for 12 hours and OFF for 12 hours every day.
- Mode B: ON for 14 hours and OFF for 10 hours every day.
- Mode C: ON for 16 hours and OFF for 8 hours every day
-If you want to change the time of day when your lights turn on, touch and hold you finger on the "
" button for 5
sec. Your grow lights will turn on at this time every day.
Werbung
