Install Battery; Battery Charging - S-idee H100 Benutzerhandbuch

Install battery

Install battery :Remove the battery compartment cover on the back of the remote
controller and insert 4"AA" alkaline battery.Make sure the batteries are connected
in correct polarity in compartment ( "AA" battery not included).

Battery charging

NB: Insert the battery wire with white connector to USB charger, connect the USB
charger to USB output port on computer or AC/DC adaptor, the charging
process starts, the LED on USB charger is on, and off when the charging is
complete.
1.Install batteries in correct polarity.
2.Do not mix old and new batteries.
3.Do not mix different type of batteries.
4.Non-rechargable batteries can not be charged.
5.Rechargeable battery must be charged under adult supervision.
6.Power terminal can not be short circuit.
7.Use the USB charger provided only for charging.
8.Exhausted batteries must be removed from the boat.
Information on LCD display
-
+
1. Insert the battery
wire with white
connector to USB
charger.
Battery cover
+
-
4 x "AA"
2.Connect the USB charger
to USB output on computer
or AC/DC adaptor.
Forward/backward trim
-3-