PATONA 216ARC Bedienungsanleitung Seite 12

» Using the remote control
Turn ON/OFF:
Press the power button "1" to turn the remote on or off.
Connect remote control to photo light:
When the remote control is on, press button (3) to enter 2.4G mode. You can set the values for CH,
GR and ID using the direction buttons (9). In order for the remote control to interact with the photo
light. It is necessary to select the same parameters (CH, GR, ID) on the remote control as on the
photo light.
Scene Mode FX:
Press button (4) to enter scene mode. You can use the direction buttons (9) to select the desired
scene.
CCT white light mode:
Press button (5) to switch to white light mode. You can set the color temperature (2500K - 8500K) with
the direction buttons (9).
Color light mode HSI:
Press button (6) to switch to colored light mode. With the direction keys (9) you can set the color satu-
ration and the color range.
Brightness settings:
Press the button (7/8) to change the brightness of the different modes.
Group settings:
In 2.4G mode, press the button (14) to control the photo light of the corresponding group or select the
group you want.
Color temperature settings:
Press the 5600K/3200K or 6500K keys to quickly switch to the desired color temperature.
Shortcuts:
The shortcut keys allow you to quickly select the desired color scale.
Warnings
• The photo light is not dust and/or waterproof.
• Protect the photo light from strong shock, do not drop it.
• Do not cover the ventilation openings, as this can lead to excessive heat development and even a
• Do not look directly into the light from the LEDs, as this can damage the retina and cause visual
impairment.
•
• The photo light and its accessories are not children's toys.
• Be sure to turn off the photo light after use. Disconnect from the power source or remove the batte-
ries.
• After use, allow the photo light to cool down before packing or dismantling.
• Do not disassemble and/or modify the photo light.
• Pay attention to the correct voltage values when using a power supply unit.
• Pay attention to the compatibility when using rechargeable batteries. Only use rechargeable batte-
ries of the type SON NP-F.
- 11 -