The Remote Control - PATONA 216ARC Bedienungsanleitung

The Remote Control

» Connect the remote control to the photo light
In order to be able to use the remote control, it is necessary for the channel, group and ID to be set the
same on the remote control and the photo light. You can control multiple photo lights with one remote
control. Use the selected group to select the respective photo light.
Activate:
Turn on the photo light and press the button with the WiFi icon.
Set channel:
Press the DIM/FN1 button to select the parameter for CH.
Then use the SET knob to set the channel (CH 1-40).
Set group:
Press the Fn2 button to select the parameter for GR.
Then use the SET knob to set the group (GR 0-9, GR A-F).
Set ID:
Press the Fn3 button to select the parameter for ID.
Then use the SET knob to set the ID (ID 1-99)
» Product Overview Of Remote Control
1.ON/OFF
2. Display
3. 2.4G mode
4. Scene mode
5. White Light Mode (CCT)
6. Color Light Mode (HSI)
7. DIM function (+)
8. DIM function (-)
9. Up, down, left, right
10. 5600K color temperature
11. 3200K color temperature
12. 6500K color temperature
13. Shortcuts for color settings
14. Group selection
15. Battery compartment cover
16. Battery compartment
- 10 -