Inhaltsverzeichnis
Werbung
All manuals and user guides at all-guides.com
Select the appropriate hardware for mounting the VESA
5.
Mount to the back of the Monitor (either M4 x 12 mm, M4
x 30 mm, or customer sourced screws).
Insert the appropriate Screws through the Screw Holes on
6.
the VESA Mount, the (Optional) Spacers, and into the VESA
Mounting Holes on the back of the Monitor and tighten,
using a Phillips Head Screwdriver.
Note: Do not over-tighten the Screws. If you encounter
resistance while you're tightening the Screws, stop
tightening. Failure to do so could result in damage to the
Monitor.
Note: It is recommended that two people mount the
Monitor.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
14
Werbung
Inhaltsverzeichnis
