Optical Mode; Operation; Setup Menu - Sonoro MAESTRO SO-1010 Bedienungsanleitung

14 Optical mode

14.1

Operation

Your external player (e.g., TV, audio amplifier) must be connected to the optical
input jack of MAESTRO with optical (TOSLINK) cable (not supplied).
To access the Optical
mode
To start and control
playback
To mute or restore the
sound output
14.2

Setup menu

Press SETUP in optical input mode to access the setup menu (see chapter "Using
the menus"). The following options are available and the current settings (if
applicable) are marked with an asterisk (*).
• [Audio clock sync.] [On], [Off]
For error-free audio transmission with some external devices, it is necessary to
deactivate the audio clock synchronization.
• [Bluetooth headphone]
To connect or disconnect to Bluetooth headphones, see chapter "Basic
operation".
• [System Settings]
See chapter "System Settings".
• [Main menu]
To access other playback modes or sleep timer.
The optical input only supports linear PCM, 2 channels 16bit or 24bit music
sources.
© sonoro audio GmbH 2023
Press DIGITAL key on MAESTRO or the remote control
to toggle to optical mode.
Perform all playback operations on the external player.
Press or button.
GB
107