MALTEC CARBON770W-PRO WiFi Bedienungsanleitung Seite 19

where the wifi icon flashes slowly (once per second) and one where the wifi icon flashes
fast (three times per second). Most devices will connect on the fast flashing mode. Press
"P" (2)to change the two modes.
7.The Heater will beep and display a solid icon when the device is connected.
8.The app will confirm that the heater has been added. You can now name the device
Select ... at top right in the control screen, then select Modify Device Name to give your
heater a logical name so that it is clear to you which heater it is.
9.You can also share it with family members, or proceed to scheduling your heating.
10.You can long press "ON/OFF" by 5 seconds to turn off the WIFI connecting, the screen
will display "OFF", long press "ON/OFF" by 5 seconds to turn on the Wifi.
Using the Smart Life/TUYA APP
1. You can use the app to control multiple devices. The status of your devices is shown on
the device list:
Offline (device can not operate by smartphone)
Turned Off (device is in standby mode)
Turned On (device is in heating mode)
2. When the heater is online, tap the device name to go to the control interface. Note:
when the heater is offline, you will not be able to control it with the app.
3. Using the Wifi and App to control the heater
 Switch: Turn on/off the heater;
 Countdown: Set 0-24 hours timer to turn on/off the heater; when the heater is
working, countdown is for turn off the heater; when the heater is off, countdown is
for turn on the heater.
 Child lock: when you turn on this, the display on the heater will show "LOCK", it
will be invalid with any key, only can be operate by APP with smartphone or
remote control.- ECO mode: when you turn on this, the icon will be light on,
when opening the room window, the room temperature drops 5 degrees in 20
minutes, the product automatically stops heating to save energy.
 7*24 hours heating schedule: you can choose time, day, target temperature, turn
on/off the heater.
 For every event, you must set a start time. Then, choose whether you want it to
repeat. Select "Only Once" if you just want to set a timer for now. If you want the
event to repeat, select which days you want it to occur. Then, choose whether
you want the heater to switch on or off. Finally, choose the target temperature to
turn on the heater . Make sure you confirm your settings at every stage and press
save to keep the event. - Each event will appear in your schedule . You can
activate and de-activate events using the toggle. You can also delete events by
swiping left and tapping Delete.
19/34