Declaration Of Compliance; Service Centre - Power Craft 78505 Gebrauchsanweisung

Every 100 hours of normal operation:
Replace the engine oil.
Every 200 hours of normal operation:
Check V-belt tension by loosening the
screws holding the drive belt cover (7) in
place, removing the cover and checking
that the V-belt (a) can � ex 10-15 mm (b).
a

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 07.00 to 17.00
(Fridays until 15.30)
• E-mail: service@hpschou.com

Declaration of compliance

We hereby declare that
has been manufactured in accordance
with the following standards or normative
documents:
EN500-1:2006+A1
EN500-4:2011
in accordance with the provisions of the
b
following directives
2006/42/EC
Kirsten Vibeke Jensen
Product Safety Manager
06.05.2016 - HP Schou A/S, DK-6000 Kolding
PLATE COMPACTOR
78505 (C-40)
97 cm
3
The Machinery Directive
14
DK
NO
SE
FI
GB
DE
PL
ET
35