Technical Data - EFALOCK Professional Intenso VENTO Betriebsanleitung

ENGLISH
• Sparking may occur at the collector of the motor inside
the unit when it is new. This phenomenon disappears
after a short period of operation and does not affect the
operational safety of the unit.
• Never use the unit without the rear filter.
• Never touch the appliance when your hands or feet are
wet.
• The hair dryer is equipped with overheating protection.
In the event of overheating, the heating is stopped and
only cold air is blown out. After cooling down, the heating
switches on again automatically.
NOTE!
▷ Persons (including children) who are unable to use the device safely due to
their physical, sensory or mental abilities or their inexperience or lack of
knowledge should not use this device without supervision or instruction
from a responsible person. Children should be supervised to ensure that
they do not play with the device.
▷ As additional protection, the installation of a residual current device (RCD)
with a rated trip current of no more than 30 mA in the bathroom circuit is
recommended. Ask your installer for advice.

TECHNICAL DATA

• Model: eVENTO intenso
• Function: professional hairdryer
• Art. no. 14102288/14102289/14102290
• Motor: Digital brushless motor
• Air flow: 119.70 (m³/h) | Air flow rate 33.25 l/sec. | Air pressure: 320.00 (mm H2O)
• Operating voltage: 220-240 V
• Output: 2500 W
• Motor: digital brushless motor
• Weight incl. motor: 402 g
• Cord length: 3 m
▷ Subject to technical modifications.