Ravanson HH-01 Bedienungsanleitung Seite 7

NOTE: This device is equipped with a safety cut-off switch. In case the heater is inclined or horizontal, it will be
automatically deactivated with the use of a switch in the base part of the heater.
Maintenance:
Always pull the plug out of the mains socket before starting any maintenance work. Let the heater cool down.
Clean with a dry or slightly wet cloth. Do not pour water or other liquids onto the device; do not submerse any
part in water. Manufacturer reserves the right to change the technical parameters of the device without notice.
When the device is switched on after a long period, a burning smell may be produced by the dust on the
heating element. After some time, the smell subsides.
Technical service:
All devices undergo a thorough post production control. If you still find any fault, you can ask technical
service for help.
Before you talk to technical service, check if:
- there is power in the wall socket,
- you followed this manual when turning the device on.
Do not:
- install the device near furniture, below shelves, inside walls, and near curtains; cover the device
when it is turned on; and always try not to hinder its correct operation.
Transport and storage:
Store out of reach of children. Protect against dust, humidity, and mechanical damage.
Transport in the original packaging. Protect against dust, humidity, and mechanical damage.
Always let the device cool down prior to storage or transport
If after purchase the product is found to be damaged, please contact your supplier. Observe the rules provided
in the enclosed manual. Do not modify nor make any changes to the product.
Defects:
In case the device refuses to work, disconnect it from the mains. Make sure there is current in the socket to
which the device is connected. Do not attempt to repair the device if there is no problem with the external
power supply. Contact authorized service.
Such a marking informs that this equipment cannot be disposed of together with other household
waste. The user is obliged to pass the device to a company authorized to dispose of electronic/
electric devices. Both the person who deals with direct disposal, shops and other local units make
a system enabling to dispose of the device. Proper procedures concerning electric/electronic
equipment disposal are intended to avoid any harmful impact to humans and environment resulting from
dangerous components and improper storage or processing of the devices. Substances having negative
environmental impact have been reduced to make the product safer after its disposal.
All manuals and user guides at all-guides.com
7