Setting the Termination Resistance
Q.SAVE has built-in termination resistance. By default, the termination resistance switch is on.
The termination resistance must be set only for the last battery connected.
If more than one battery is connected, turn o all the termination resistance switches except the last battery.
For exmaple,
When 2 batteries are connected:
■
Q.SAVE #2
ON
When 3 batteries are connected:
■
Q.SAVE #3
ON
40
Q.SAVE #1
Q.VOLT
OFF
Q.SAVE #2
Q.SAVE #1
OFF
OFF
OFF
Q.VOLT
ON