Assembly And Components; Control Panel; Controls - Siemens TI 3 1 Serie Gebrauchsanleitung

en Getting to know your appliance

Assembly and components

~ Fig. "
( On / off button (stand-by mode)

0 Control panel

8 Handle of milk frother
@ Outlet system for coffee, height
adjustable
H Milk frother (holder, frother, cover),
height adjustable

Controls

Button Meaning
Switch the appliance on and off
k
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■
■
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 39
espresso Dispensing Espresso
caffe crema Dispensing Caffe crema
Dispensing cappuccino
cappuccino
latte macchiato Dispensing latte macchiato
milk Frothing up milk
Coffee strength
%
Adjusting the coffee strength ~ "Adjusting beverage settings" on page 37
calc'nClean Start the service programme
Flashes when the service programme needs to be performed.~ "Calc'nClean
service programme" on page 45
--------
32
it is still warm when switched on, or
coffee was not dispensed before the appliance was switched off.
P Drip tray (coffee grounds
container, drip grate, drip plate,
float)
X Door of brewing chamber
` Rating plate
h Brewing unit
)" Aroma lid
)* Bean container
)2 Rotary selector for setting grinding
level
): Cover for water tank
)B Water tank