Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read
these instructions carefully before starting the installation and keep this manual handy for
future reference. If you have any another query, please contact our dealer or local vendor from
whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the
product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24
Hours a day would void the warranty. This product is warranted for manufacturing defects only.
INSTALLATION DIAGRAM
NOTE: Compatible with V-TAC LED Tubes - Single side power supply
1. Switch o the power before
starting the installation
3. Fix the wire through the fitting.
5. Install the lamp holders as shown.
7. Fix the front cover of the fitting.
EN
T8 BATTEN FITTING
8. Insert LED Tube
2. Remove the front cover of the fitting.
4. Install the fitting on the wall
(Accessories not included).
6. Connect the wires as indicated on the
fitting.
9. Switch on the
power to test the
light.
Werbung
