Electric Specifications; Components Of The Appliance - CANGAROO Bollente DQ-N01 Gebrauchsanweisung

•Do not leave and do not keep the product in a place, where it can fall or can be pushed into
sink or bath.
• Do not immerse the supply cord, the plug or the appliance into water or other fluid.
•WARNING: In order to reduce the risk of burnings, electric shock, fire and injuries:
•Do not put accessories, which are not approved by the manufacturer and do not make any
improvements or changes in the product as this will lead to its malfunction or damage.
Do not use this product when there is damaged cord or plug, if it doesn't operate properly, if
it was dropped or damaged, or if it has been dropped into water. You should contact the sales
agent, from which you have bought the product or the importer, in order the appliance to be
repaired.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Do not try to repair the product or the cable/ plug by yourself.
• Keep the cord away from heat sources or hot surfaces.
• Do not try to modify the product or to repair it by your self when there is damage. For
advise contact an authorized service center or the shop, from where you bought the warmer.
• Do not use spare parts, which are not the original ones, provided by the manufacturer or
the importer.
28. When the product is not being used, store it in a dry cool place, away from direct heat
sources, water or the reach of children.
1. Voltage: 220-240 V~; 2. Frequency: 50Hz; 3. Power: 150W; 4.Room temperature: 15 ͦ C – 30; 5. Humidity:
50% - 80 ͦ C .
➢SEE FIGURE PD:
1: Body of the warmer; 2: ON/ OFF button and mode selection (displays temperature and time); 3: Bottom of
the appliance; 4. Cover; 5. Tray-holder for bottles/jars with food/eggs
➢Attention! Note that the speed at which the appliance heats the milk or food depends on: the bottle size;
the material used for the bottle; the amount of food; and the temperature of the milk or food itself (e.g. room
temperature 20°C or after being taken out from the fridge 5°C).
➢The final temperature of the milk depends on the size, material (plastic or glass), type and amount of liquid.
➢The product is designed to enter energy-saving mode after reaching the set temperature for each function.
The indicator will start to glow green, and the appliance will stop heating.
➢ We recommend you to use of boiled or filtered water in order to reduce the risk of limescale deposition. DO
NOT POUR BOILING WATER INTO THE HEATER TO AVOID DAMAGING THE APPLIANCE OR LIMESCALE
DEPOSITION.
➢The limescale deposition without being cleaned will adversely affect the performance of the heater.
➢ATTENTION: The electric warmer produces hot steam. Do not hold and do not put your hands close to the
product, while it works, to avoid risk from burning.
➢Recommendations:
- The temperature in the water will decrease with few degrees, when the powdered milk get poured into the
bottle with water.
-The temperature of the water can influence by the high or low initial temperature of the liquid in the baby
bottle or the food.

ELECTRIC SPECIFICATIONS

COMPONENTS OF THE APPLIANCE

USE
9