Scope Of Delivery; Operation Of The Device - EFALOCK Professional BEARD BRUSH Betriebsanleitung

ENGLISH

SCOPE OF DELIVERY

• EFALOCK beard straighener BEARD BRUSH
• Heat protection bag
• Heat protection gloves
• User manual

OPERATION OF THE DEVICE

Description
6. Mains cable
Activation
The BEARD BRUSH is ready for use by inserting the plug into a power outlet.
▷ Lay the cable in a manner so that nobody can trip over it.
▷ Keep the connecting cable away from hot surfaces.
Operation
Switching on the device: Set the On/off button to "ON" (1). The operating LED (2)
lights up red. A constant operating temperature of approx. 200 °C is achieved
after a preheating time of approx. 2-3 minutes.
Switching off the device: Set the On/off button to "OFF" (1). The operating LED (2)
goes dark. Remove the mains plug from the power outlet.
Use
1. Comb your dry beard hairs well using a beard comb.
2. Then comb through your dry beard hair with the preheated BEARD BRUSH.
Repeat the process 2 to 3 times until the desired hair smoothness is achieved.
2. Operating LED
1. On/off button
5. Protective rubber
coating of the heating
elements
BEARD BRUSH
3. Grip lines for
secure hold
4. Ceramic heating
elements