Scope Of Delivery; Operation Of The Device - EFALOCK Professional TRAVEL STRAIGHT BRUSH Betriebsanleitung

ENGLISH

SCOPE OF DELIVERY

• EFALOCK smoothing brush TRAVEL STRAIGHT BRUSH
• Heat protection bag
• Heat protection gloves
• User manual

OPERATION OF THE DEVICE

Description
6. Mains cable
Activation
The TRAVEL STRAIGHT BRUSH is ready for use by inserting the plug into a power
outlet.
▷ Lay the cable in a manner so that nobody can trip over it.
▷ Keep the connecting cable away from hot surfaces.
Operation
Switching on the device: Set the On/off button to "ON" (1). The operating LED (2)
lights up red. A constant operating temperature of approx. 200 °C is achieved
after a preheating time of approx. 2-3 minutes.
Switching off the device: Set the On/off button to "OFF" (1). The operating LED (2)
goes dark. Remove the mains plug from the power outlet.
Use
1. Comb your dry hair well and, if necessary, separate some sections of your
hair.
2. Then slowly run the preheated TRAVEL STRAIGHT BRUSH through your dry
hair section by section. Repeat the process 2 to 3 times until the desired hair
smoothness is achieved.
3. For best results, the sections of hair should not be too thick.
TRAVEL STRAIGHT BRUSH
2. Operating LED
1. On/off button
5. Protective rubber
coating of the heating
elements
3. Grip lines for
secure hold
4. Ceramic heating
elements