Operation Of The Device - EFALOCK Professional e-DRY Betriebsanleitung

ENGLISH

OPERATION OF THE DEVICE

Description
5. Air outlet
6. Undulating
nozzles
(6 cm, 7 cm)
How to use
▷ Lay the cable of the power supply unit so that nobody can trip over it.
▷ Keep the connecting cable away from hot surfaces.
1. The hairdryer eDry is ready for use by inserting the plug into a power outlet.
2. Switching on: Set the output level switch (1) to the required level (level I, II) and
select the required temperature setting (2) (level I, II or III).
3. For each of the temperature and speed settings, you can additionally press
the cold button.
4. Switching off: Set the level switch (1) to OFF - 0.
5. Let the device cool down sufficiently after use.
CLEANING, CARE & STORAGE
▷ Before maintenance, switch off the device and disconnect it from the
power supply.
▷ Only clean the device when it has cooled down!
Cleaning the device
• Wipe the device with a damp (not wet) cloth. Make sure that no liquid enters the
inside of the housing. Then dry it with a clean cloth.
• Regularly check the air intake mesh (4) for contamination. If necessary: Clean
the air intake mesh (4) with a suitable brush or vacuum cleaner.
1. Power:
• OFF - 0
• Level - 1
• Level - 2
4. Air intake grille
(removable)
3. Cold button -
2.Temperature
• Level - 1
• Level - 2
• Level - 3