Repairs; Troubleshooting - BOMANN WPT 5018 Bedienungsanleitung

Cleaning the vents
Clean the grid approx. every two months with a damp cloth. If
necessary, use a soft brush. Dry thoroughly.
Emptying the condenser water tank
Empty the condenser water tank after each drying cycle.
If the tank overflows while a
programme is running, the drying
cycle stops and the corresponding
indicator will appear on the display.
After you have emptied the
condenser water tank, press the
START/PAUSE button to continue
the drying cycle.
Before you contact an authorized specialist
The following problems can be solved by you by checking for the possible cause.
problem
The appliance does not function/start.
The housing is hot or there is a smell of
burning.
Unusual odours and powerful vibrations.
Fabrics are too dry.
Fabrics are misshapen.
Error messages
display indicator Cause of problem
Lint filter is blocked
Condenser water tank is full
E32 Problem with moisture sensor
E33 Problem with temperature sensor
NOtE: If a problem still persists after following the steps above, contact your distributor or an authorized technician.
A wrong or improperly performed repair brings danger to the
user.
Repairs to electrical appliances must only be carried out by an
authorized specialist. A damaged power cord must be changed
only by a qualified electrician.

troubleshooting

Cause / action
- Check the power supply.
- Is the appliance switched on or a programme selected?
- Have you pressed the START/PAUSE button?
- Check the maximum capacity guidelines.
- The lint filter is blocked and must be cleaned.
- The filter base must be cleaned.
- The appliance must stand on a solid base.
- Are the screw-in feet aligned?
- Check the maximum capacity guidelines.
- Was the washing removed in time?
- The washing was not properly sorted.
- Set the correct temperature.
Always follow the instructions on the care label of your fabrics.
Action
Clean or unblock the lint filter and if necessary, the vents
and restart the appliance.
Empty the condenser water tank.
Call a specialist.
Call a specialist.

Repairs

21