Garmin TACX NEO BIKE PLUS Schnellstartanleitung Seite 10

6 Use the 8 mm hex key to remove the set screw from the saddle post.
7 Adjust the saddle height, and secure the M16 x 22 handle
The maximum saddle height is 26 cm.
8 If necessary, use the 5 mm hex key to adjust the saddle angle bolt
Installing the Handlebar
Before you install the handlebar, see the topics on posture (page 3) and geometry (page 4).
E
1 Open the assembly kit
2 Use the 6 mm hex key to remove the set screw.
3 Place the cap on the handlebar rail
10
.
.
.
.
Quick Start Manual