laxihub O2 Kurzanleitung Seite 4

EN
EN
• Connect Arenti APP
Scan QR code to download and install the Arenti APP.
Also, you can search "Arenti" on App Store (IOS) or Play
Store (Android). Download and install Arenti APP. Open
APP home page, Click "+" at the right top page. Follow the
guide on the APP to add the camera step by step.
After connection is successful, the indicator is solid blue.
Troubleshooting
• Camera is not powering on:
1. Try to use another outlet.
2. Try to use another 5V power adapter/cable to power up.
• Failed to scan the QR code from Arenti APP:
1. Remove the film from the Camera Lens.
2. Keep distance 10-15 cm (4-6 inch) between the camera
and mobile phone.
3. Confirm the camera indicator is red flashing slowly.
• Failed to connect WiFi:
1. Confirm that scan QR code is successful: After scanning,
the camera has the prompt sound, and network indicator
turns to red fast flashing.
2. Make sure input correct WiFi password, the WiFi password
you set not contain special characters such as =\';.
3. Make sure the WiFi band meets the network requirement
of camera that camera only supports 2.4GHz.
4. Confirm camera is near the WiFi router.
If there doesn't work please share the wifi router setting
screenshot and camera SN (Find on camera body) to
support@arenti.com to get help.