Product Description - laxihub O2 Kurzanleitung

Product description

Please read this manual carefully before using the product
and keep it properly. Label information is located on the
side of the camera.
1. Microphone
2. LED indicator
3. SD card slot
4. Reset
5. Micro USB
6. Speaker
Packing list：
Camera, Power adaptor, Power cable, Mounting accessory
bag, Quick guide.
LED Indicator:
Constant blue
Blue slow flashing
Red flashing slowly
Red flashing fast
Set up Camera
• What you'll need：
1. Wi-Fi and a working broadband internet connection
with at least 2 Mbps upload speed.
2. A phone or tablet with iOS 9/Android 5.0 or later.
3. A power outlet.
4. A Phillips screwdriver or power drill with Phillips driver bit.
• Power on
Plug the power cable into the Micro-USB power port on
the back of the camera, the camera will automatically turn
on, wait for 30s, the indicator light will flash red slowly
means boot up is finished.
1
2
3
4
5
6
Connection succeeded
Manual configuration mode
Waiting to connect
Network abnormal
EN
EN