Troubleshooting Guide - Philips SBCRP520/00 Bedienungsanleitung

Instructions for use
All manuals and user guides at all-guides.com
Additional functions TV
300 Smart picture
301 Smart Sound
302 EPG
303 EPG info
304 EPG record
305 Set alarm
306 Alarm reset
307 Alarm on/off
308 Light on
Access to added functions
1
Press and hold the Shift button on the left top side of
the remote control.
2
Simultaneously press the button of the added function.
Resetting all functions
If you want to return to the original functions of all keys and
delete all added functions under programmed keys:
Press and hold the OK and digit 0 button simultaneously for
about five seconds.
– The buttons on your remote control will now perform their
default functions.

TROUBLESHOOTING GUIDE

• Problem:
– Solution:
• The SBC RP520 is not working at all.
– The SBC RP520 needs to be adjusted to your TV. See
'Adjustments to your remote control'
– The batteries are empty. Place new 1,5V AA batteries.
• Your TV is sometimes not responding to remote control
commands.
– Aim the remote control to your TV and be sure there are no
obstacles in between.
– The batteries are almost empty. Place new 1,5V AA batteries.
• The colour buttons are not working properly .
– The SBC RP520 needs to be adjusted to your TV. See
'Adjustments to your remote control' .
• Teletext buttons are not working or not working properly.
– The SBC RP520 needs to be adjusted to your TV. See
'Adjustments to your remote control' .
• The Picture in Picture (PIP) buttons are not working.
– The SBC RP520 needs to be adjusted to your TV. See
'Adjustments to your remote control' .
6
Additional functions VCR
500 -/--
501 Select/VPS
502 Timer
503 Pause
504 Clear
505 Go to
506 TV/VCR
507 SP/SL play
508 Showview
509 Monitor
510 Tuner