Safety Information - PestWest UV-A Meter Gebrauchsanweisung

ENGLISH
THANK YOU FOR PURCHASING THE PESTWEST UV-A METER. PLEASE READ
THROUGH THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
USE THE METER. PLEASE ALSO RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
FEATURES
The PestWest UV-A meter has been specifically designed to measure the
condition of the ultraviolet light output of UVA insect attracting fluorescent
lamps fitted in electronic fly traps. The PestWest UV-A meter is a mobile, hand-
held device and is suitable for use with electronic fly traps with a total combined
lamp wattage of between 10 and 80 Watts.
The meter features a 10 point coloured LED bar indicator scale and utilises only
two simple function buttons. The meter has the ability to measure and store
ambient UV light levels from the area of measurement to accurately calculate the
actual UV levels emitted by the trap.
The PestWest UV-A meter is powered by two AAA alkaline batteries (not
included) and has a low battery indicator system combined with an automatic
power down system to save battery life (if the unit is no longer used for 60
seconds.)
Note – The PestWest UV-A meter is designed to work with quality, ROHS-compliant
368nm fluorescent tubes only, and will not measure the UV light from LED traps.
THE PESTWEST UV-A METER CAN BE USED FOR TWO SPECIFIC FUNCTIONS:
A. To measure the condition of the UVA output of the lamps fitted in an
electronic fly trap to determine if replacement is required.
B. To measure the ambient UVA light levels for optimal siting of new fly traps

SAFETY INFORMATION

1. Use only for measuring ultraviolet light from insect traps fitted with
fluorescent lamps.
2. Avoid long periods of exposure to UV light in close proximity.
3. WARNING! – Do not insert tape measures into energized electric fly killers.
Failure to comply with this safety instruction may result in electric shock
causing serious injury or death.