Inhaltsverzeichnis
Werbung
MSR711
1. Shaving head
2. Housing of the shaving heads
3. Button used to open the housing of the shaving heads
4. On/Off button
5. Display
6. Socket
CHARGING THE APPLIANCE
If the appliance's battery charge is low or the battery is totally discharged, it needs charging. Insert the
power supply cord into the appliance and connect the power supply unit to the electrical grid.
The charging indicator of the appliance will then display its charging status. If the appliance is totally
discharged, the indication of its charging status may be delayed. This delay should be no longer than 2
minutes.
Having connected the appliance to the charger, you may continue using the appliance. However, do
not use the appliance in the vicinity of baths, showers, swimming pools or similar water tanks.
SHAVER OPERATION
Switch the shaver on with the On/Off button.
Move the shaver across the skin surface, making circular movements.
Clean the shaving head after each use with the provided brush.
Note: Each shaver requires the skin and hair growth to adjust to the blade system applied. The first
shaves may not be perfectly accurate and the skin may be irritated. The adjustment period may last up
to 3 weeks.
Status Display – when the
shaver is working, the light will circle around the icon.
When the shaver is plugged to charger, the icon will fully illuminate.
Travel lock – This icon flashes to indicate that the shaver is locked.
Press for 3 seconds to lock/unlock the shaver
Time remaining – Show available operating time left on the battery
(from 200 to 0 minutes)
Cleaning reminder (it will flash for 5 second, each 30 minutes of operation)
Charging reminder – When remaining operation time is less than 10 minutes,
it will flash to remind to charge the shaver. When the shaver is plugged to
charger, this light will stay on.
3
Werbung
Inhaltsverzeichnis
