Customer Service - Eks 8009 Benutzerhandbuch

Application part type BF
The appliance should be disposed
of according to Regulation
2002/96/EC-WEEE (Waste
Electrical and Electronic Equipment).
Medical Technology Promedt
Consulting GmbH, Altenhofstrasse 80,
D-66386 St. Ingbert, GERMANY
Radiant Innovation Inc. 1F, No. 3
Industrial East 9th. Road,
Science-Based Industrial Park,
Hsin Chu, Taiwan 300
GUARANTEE
EKS guarantees that all defects due to materials or manufacturing faults will be remedied
by replacement or repair for a period of 2 years from the date of purchase. Please keep
the purchase receipt and guarantee card in a safe place. If you have any complaints,
please return the product to your dealer with the guarantee card and the receipt.

Customer Service

If you have any questions or concerns regarding this product or its operation, or any
attempt to correct a problem fails, please call our Customer Service Hotline. Our trained
specialists will be happy to assist you, train you, or even reaffirm your results.
EKS Customer Hotlines:
French, German & Italian (9.00 – 16.00) +33 – 388 868 945
English & Swedish (8.00 – 16.00) +46 – 371 - 33600
Spanish (8.30 – 13.00) +34 – 915 083 293
E-mail: support@eks-int.com
Website: www.eks-int.com
Error 5-9, the system is not
functioning properly
Temperature taken is higher
than 42.2 °C (108.0 °F).
Temperature taken is lower
than 34 °C (93.2 °F).
Device cannot proceed to
the ready stage
Unload the battery, wait for 1
minute and start again. If the
message reappears contact
the retailer for service.
Check that the probe cover is
correctly attached and take a new
temperature measurement.
Make sure the probe cover is
clean and take a new temperature
measurement.
Change with a new battery.
Manufactured in accordance with
international standards.
The instrument is in line with the
EU Medical Products Directive
MDD 93/42/EC.
Subject to changes without notice.
Change the probe cover after each
use to ensure an accurate reading
and avoid cross contamination.

0197