iDance GROOVE BULL 10 Bedienungsanleitung Seite 3

14
1
2
7
3
8
4
5
6
12
13
15
Panel Description:
1. MODE: It is for switching between different audio
source – Mini jack LINE-IN / Bluetooth audio / MP3
player
9
2. REC: Record button to enter record / record
playback mode, see next page for detail operation
3. REPEAT: press to switch repeat mode (one/all)
4. PREVIOUS: press to switch previous song in USB/
MICRO SD (TF) MP3 mode.
5. PLAY/PAUSE: Press to play/pause USB/MICRO
SD (TF) MP3 player music
10
6. NEXT: press to switch previous song in USB/
MICRO SD (TF) MP3 mode.
7. USB/MICRO SD (MICRO SD (TF)) Card player:
Insert USB/MICRO SD (MICRO SD (TF)) Card drive
with MP3 file to this port.
11
8. AUX IN (external audio interface): 3.5mm stereo
input for connecting external audio devices. You
may connect your Smartphone / Tablet as external
music source with a 3.5mm line-in cable.
9. POWER (power switch): main ON/OFF switch for
Groove BULL 10
(Note: Battery charging is independent of Power
switch ON/OFF status)
10. Charging LED: The LED indicators at the
back panel indicate whether the battery is in
charging,(RED = Charging, GREEN = FULL)
11. MIC (Microphone input): Plug wired microphone
with ¼" jack to this socket
12. TONE: Turn the knob to left side "-" to adjust the
bass level, turn the knob to the right "+" to adjust
the treble level.
13. DC-IN: DC5V USB charging cable input.
(RED = Charging, GREEN = FULL)
14. SPEAKER LED (switch): ON/OFF switch for
Groove BULL 10's LED light show of woofer
15. MIC. VOL (microphone volume): Turn the right
knob of front panel to adjust microphone volume
level.
16. MASTER VOLUME: Turn the left knob of front
panel to adjust master volume level.
16
ENGLISH