Yealink SIP-T46U Kurzanleitung Seite 6

E
N
G
L
3. Connect the USB flash drive, as shown below:
I
S
H
Note: The USB ports can also be used to connect other USB devices, such as EXP43, USB headset and so on.
Yealink recommends that you connect Bluetooth USB dongle or Wi-Fi USB dongle to the upper USB port, and
connect EXP43 to the lower USB port.
4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one to use.
Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may
cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable
provided by Yealink.
If inline power (PoE) is provided, you don't need to connect the power adaper. Make sure the hub/switch is PoE-compliant.
Startup
After the IP phone is connected to the network
and supplied with power, it automatically begins
the initialization process. After startup, the phone is
ready for use. You can configure the phone via
phone user interface or web user interface.
2
a. Upper USB Port
PC
PC Connection
(Optional)
PC
A
AC Power Option
PC
B
PoE ( Power over
Ethernet ) Option
PC
PC Connection
(Optional)
b. Lower USB Port
Power Adapter
(DC 5V)
Internet
Internet
IEEE 802.3af compliant
PoE Hub/Switch
Welcome
Initializing... Please wait