Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Moun�ng and installa�on
•
Your new LED projector must be securely installed before you start using it. The mounting plate offers you a wide
range of options. Any stable, flat surface is suitable, regardless of its orientation.
•
Ensure that the supporting structure can handle this load. It must carry at least four times the expected load. Inform‐
ation on how much your device weighs is provided in the technical specifications.
•
Select the fastening materials based on the load, the nature of the support material, and the fire and building regu‐
lations.
•
4.1. Mounting the projector
1.
Ensure that the device is voltage-free.
2.
Loosen and remove the four fastening screws on the
side of the device base, including the conical spring
washers.
3.
Disconnect the mounting plate from the device base.
4.
Use both curved slotted holes for aligning and fixing
the projector. Additional fastening can be realised via
the middle hole.
5.
Fasten the device base to the mounting plate using
the four cylinder head screws and the conical spring
washers.
22
Mounting
Orgatex
Werbung
Inhaltsverzeichnis
