Zipper Maschinen ZI-KGS210DS Betriebsanleitung Seite 43

• Swing the machine head upwards.
• Loosen the screw (1).
• Loosen the screw (2) and dismantle the support (3).
• Slide the plate (4) and the movable saw blade guard (5) upwards until the flange screw (6) is
accessible.
• Press the spindle lock button (7) with one hand while placing the 6 mm Allen key on the flange
screw (6) with the other hand.
• Turn the saw blade until the spindle lock engages.
• Now loosen the flange screw (6) with a little more pressure.
NOTE: Left-hand thread!
• Remove the flange screw (6) and the outer flange disc (8).
• Remove the saw blade from the spindle.
• Clean the flange screw (6), the outer flange disc (8) and the inner flange disc.
• Put a new saw blade on the spindle.
NOTE: Ensure the correct direction of rotation!
• Place the flange screw (6) and the outer flange disc (8) on the spindle and tighten it.
• Return the plate (4) and the movable saw blade guard (5) in their original position.
• Fix the plate (4) again with the screw (1).
• Fix the support (3) and the movable saw blade guard (5) with the screw (2).
• Check that the saw blade guard works properly and moves up and down when the machine head
is moved (Machine head position up saw blade guard covers the saw.
Pay attention to correct direction of rotation and dimension of the saw blade.
Limits for dimension: Max. Diameter of 210mm and max. thickness of 2.6mm, as well as
mounting diameter of 30mm.
• Before continuing with your work, make sure that all safety devices are in good operating condition
(Saw blade protection check).
• Important! Whenever changing the saw blade, check that it rotates freely in the table insert, both at
vertical and 45° angle settings.
• Important! The work for changing and aligning the saw blade must be carried out correctly.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
C AU TI O N
43
ZI-KGS210DS